Close Button

Oneida 10HP 230V Direct Drive Cyclone Dust Collector w/ Air Lock – No Drum

made in usa
Note: shown with optional equipment.

10HP 230V Direct Drive Cyclone Dust Collector w/ Air Lock – No Drum

Realize the Power of American Manufacturing

Our 10HP Direct Drive system is the workhorse of our industrial line of cyclonic dust collection systems – delivering maximum airflow performance within a compact, quiet, and cost-effective package. Built to last a lifetime using industrial, heavy-gauge steel components, our 10HP is ideal for commercial shops with fixed ductwork and multiple tools in use simultaneously.

Included Features & Components

  • Industrial 10HP U.S. Made Motor
  • Backward Inclined, Non-Sparking, Cast-Aluminum Impeller
  • High-Efficiency 230V / 3-Phase Power 
  • Magnetic Starter with Overload Protector
  • Heavy-Gauge Solid Welded Steel Cyclone Separator with Clean-Out Access Door
  • Modular Stacking Spunbond Cartridge Filters
  • Real-time Filter Efficiency Pressure Gauge
  • Drop-In Acoustic Foam Filter Silencers
  • Industrial Angle Iron Frame Stand
  • Rotary Air Lock Feeder Valve
  • 2 Year Limited Warranty

Continuously High Airflow Performance

Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That’s why Oneida Air Systems uses only the highest quality motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

  • High-efficiency, fan blower motor – Made in USA.
  • Industrial-grade brushless motor designed for continuous duty.
  • Uses 3-phase power for commercial applications.
  • Includes grease fittings for easy maintenance.
  • Low pitch noise level provides ideal operator comfort.
  • Heavy-gauge steel fan housing, full seam welded, built to last a lifetime.

Ultra-High Efficiency Steel Cyclone Separator

Features Oneida Air Systems’ unique long-tapered cyclone design that provides maximum pre-separation efficiency compared to the squatter cyclone designs of competitors.

  • Removes up to 99% of fine dust and bulk debris from the airstream, before it reaches the filter.
  • Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
  • Significantly extends the lifespan of the filter and reduces downtime needed for maintenance.
  • Rectangular, neutral-vane inlet with 10″ dia. square-to-round adapter.
  • System’s inlet and outlet rotate independently at 45 degree increments to suit your shop’s needs.
  • Industrial 16 gauge steel construction with full welded, airtight seams.
  • Highly durable, rust preventative, almond-white powder coat finish.

High Quality & Serviceable Filtration

Our industrial Direct Drive systems use spunbond polyester cartridge filters that are specifically designed for dust collection applications – providing unbeatable airflow and filtration performance – and are proudly made in the USA!

  • We fully stand by the quality and performance of our filters; each filter is sent to an accredited independent testing lab. Contact us for more information and documentation.
  • Wide-spaced pleating and non-stick PTFE membrane coating facilitates quick and easy maintenance.
  • Patented filter stacking system provides the same filtration area as a single, larger filter, but without the cumbersome weight and installation.
  • Patented internal acoustic foam silencers reduces noise caused by air vibrations by 1–2 dBa.
  • Includes Filter Efficiency Performance Gauge that takes the guesswork out of filter maintenance.

Automated Bulk Waste Disposal

Rotary air locks provide operators with the most economical, productive, and efficient way to handle bulk dust and debris, making them ideal for cabinetmakers, furniture manufacturers, and other commercial shops generating high volumes of waste material.

Our airlocks use high-efficiency US-made motors to control the flow of discharge material from the dust collector via a rubber padded wheel that rotates at a preset speed. The airtight seal with the collector is maintained at all times, ensuring peak airflow performance while waste is continuously deposited into open bins, industrial hoppers, or transfer blower systems.

  • Significantly reduces shop downtime and labor costs for emptying bins while limiting dust exposure within the work environment.
  • Helical drive US-made motor is compact, durable, and quiet.
  • Valve constructed from fully seam-welded, cold rolled steel with powder coat finish.
  • Long lifespan rubber paddle wipers can be easily replaced by the operator.

Our system operates at a slower rotational speed than competitive products for reduced energy usage, quieter operation, and less wear and tear on the motor and air lock seals – all without impacting the flow of dust and debris through the system!

 

Specifications
Horsepower:
10HP
Motor Type:
U.S. TEFC Motor
Motor Service Factor:
1.15
Voltage:
208-230V
Amperage (Typical):
26.2-23.8A
Phase (Pre-Wired):
3-Phase
Frequency:
60Hz
Power Connector:
Bare Wiring (three hot wires & ground) - Licensed Electrician Required
Impeller Type:
Backward inclined, welded carbon steel
Impeller Size:
17" Dia.
Real CFM Rating:
3,800 Actual CFM at 2.3" S.P.
Noise Level:
84-85 dBA @ 10 ft
Filter Type:
Izumi Axtar Spunbond Media
Filtration Efficiency:
99.9% @ 0.2-2.0 microns
MERV Rating:
MERV 13 ±
465 sq ft:
Customizable
Sold Separately:
Item #AKR220003
Primary Build Materials:
Cold Rolled Steel
Welding:
Seam Welded
Static Resistance Rating:
Conductive (Metal)
Color:
White
Inlet Size:
Round: 12" I.D. Square ID: 8"(W) x 14"(H) Square OD: 10-1/2"(W) x 16-1/2"(H)
Outlet Size:
Square ID: 12-1/2"(W) x 10"(H)
Discharge Size:
10" I.D. Flange
Width:
122"
Depth:
33"
Height:
163"
Height to Center of Inlet:
131"
Contents:
Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Clean-out Access Door, Square-to-Round Inlet Adapter, Filter Plenum, 6x Modular Cartridge Filters, Filter Efficiency Gauge, Angle Iron Stand, Rotary Air Lock Valve, Hardware
Country of Manufacture:
United States
Warranty Information:
2 Year Limited Warranty
Certifications:
Complete system is cETLus certified for indoor use
Applicable Patents:
U.S. Patents #7247180, #9370740
Pricing Options:
Starting at $12,395.00
* All pricing subject to change
  • Specifications
Specifications
Horsepower:
10HP
Motor Type:
U.S. TEFC Motor
Motor Service Factor:
1.15
Voltage:
208-230V
Amperage (Typical):
26.2-23.8A
Phase (Pre-Wired):
3-Phase
Frequency:
60Hz
Power Connector:
Bare Wiring (three hot wires & ground) - Licensed Electrician Required
Impeller Type:
Backward inclined, welded carbon steel
Impeller Size:
17" Dia.
Real CFM Rating:
3,800 Actual CFM at 2.3" S.P.
Noise Level:
84-85 dBA @ 10 ft
Filter Type:
Izumi Axtar Spunbond Media
Filtration Efficiency:
99.9% @ 0.2-2.0 microns
MERV Rating:
MERV 13 ±
465 sq ft:
Customizable
Sold Separately:
Item #AKR220003
Primary Build Materials:
Cold Rolled Steel
Welding:
Seam Welded
Static Resistance Rating:
Conductive (Metal)
Color:
White
Inlet Size:
Round: 12" I.D. Square ID: 8"(W) x 14"(H) Square OD: 10-1/2"(W) x 16-1/2"(H)
Outlet Size:
Square ID: 12-1/2"(W) x 10"(H)
Discharge Size:
10" I.D. Flange
Width:
122"
Depth:
33"
Height:
163"
Height to Center of Inlet:
131"
Contents:
Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Clean-out Access Door, Square-to-Round Inlet Adapter, Filter Plenum, 6x Modular Cartridge Filters, Filter Efficiency Gauge, Angle Iron Stand, Rotary Air Lock Valve, Hardware
Country of Manufacture:
United States
Warranty Information:
2 Year Limited Warranty
Certifications:
Complete system is cETLus certified for indoor use
Applicable Patents:
U.S. Patents #7247180, #9370740
Pricing Options:
Starting at:
 
Pricing Options:
Starting at $12,395.00
Media
  • Please fill out the form to access the finance calculator

  • Thank you for your interest.

    Please fill out the form below to receive your free Brochure.