Close Button

Oneida 5HP 1ph High Vacuum Cyclone Dust Collector

made in usa
Note: shown with optional equipment.

High Vacuum Pressure Dust Control for Industrial CNC Cutting Tools

Our 5HP High-Vacuum Dust Collector is one of our most powerful professional dust collection systems and is designed for small to medium sized shops running tools, such as CNC machines, where a high amount of static pressure is needed to adequately collect airborne dust. The unique configuration of our High-Vacuum systems make full use of the high-efficiency U.S. motor and cyclone separator to deliver maximum static pressure to multiple tools simultaneously.

This high pressure system is ideal for use with any type of CNC cutting tools as well as saws, jointers, lathes, shapers, planers, routers, sanders, and more!

Learn how the High Vacuum helped Kawneer North America improve their production workflows. Read the case study

Included Features & Components

  • Industrial 5HP U.S. Made Fan Blower Motor
  • Magnetic Starter w/ Overload Protector
  • Heavy-Gauge Seam Welded Steel Cyclone Separator
  • High-Efficiency Modular Cartridge Filters
  • Real-time Filter Efficiency Gauge
  • Internal Foam Silencer
  • Compact, Heavy-Duty Steel Angle Frame Stand
  • 55-Gallon Reinforced Steel Dust Bin
  • D.I.Y. Ductwork Design Guide
  • 2 Year Limited Warranty

Continuously High Airflow Performance

Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That’s why Oneida Air Systems uses only the highest quality motors with our dust collection systems. Far superior than the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

  • High-efficiency fan blower motor – Made in USA
  • Industrial-grade brushless motor designed for continuous duty
  • 1 and 3-phase power options available.
  • Delivers up to 2,150 Actual CFM at 2″ S.P. – ample airflow for multiple woodworking tools at once.
  • Low pitch noise level provides ideal operator comfort
  • System’s inlet and outlet rotate independently at 45 degree increments to suit your shop’s needs.
  • Heavy-gauge steel fan housing, full seam welded, built to last a lifetime.

Ultra-High Efficiency Steel Cyclone Separator

Features Oneida Air Systems’ unique long-tapered cyclone design that provides maximum pre-separation efficiency compared to the squatter cyclone designs of competitors.

  • Virtually eliminates filter clogging and suction loss to provide continuous suction performance.
  • Significantly extends the lifespan of the filter and reduces downtime needed for cleaning.
  • Large 8″ dia. neutral-vane inlet for use with 8″ to 6″ ductwork layouts.
  • Industrial 16 gauge steel construction with full welded, airtight seams.
  • Durable, rust preventative, almond-white powder coat finish.

Compact, Configurable Design

With its compact footprint, the 5HP High-Vacuum system can be configured to work easily into most ductwork setups. Designed for larger shops running multiple tools, this system can also be outfitted with different support systems and dust container configurations (e.g. splitter kit, hoppers, airlocks, etc.) – Call for details.

Specifications
Horsepower:
5HP
Motor Type:
U.S. TEFC Motor
Motor Service Factor:
1ph: 1.00 | 3ph: 1.15
Voltage:
208-230V
Recommended Breaker Size:
30A
Amperage (Typical):
1ph: 19.5A
Frequency:
60Hz
Power Connector:
NEMA 6-20 - 250V/20A : Bare Wiring (three hot wires & ground) - Licensed Electrician Required
Power Cord Length:
10 feet
Power Cord Length:
Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.
Impeller Size:
16-1/2" Dia.
Real CFM Rating:
2,150 Actual CFM at 2" S.P.
Free Fan CFM Rating:
3,225 CFM
Maximum Suction:
16" WC
Noise Level:
75-81 dBA @ 10 ft
Filter Type:
Izumi Axtar Spunbond Media
Filtration Efficiency:
99.9% @ 0.2-2.0 microns
MERV Rating:
MERV 13 ±
Total Filtration Area:
155 sq ft
Waste Capacity:
55 Gallons
Remote Control:
Sold Separately
Remote Control Part #:
1ph: Item #AXR220000
Primary Build Materials:
Cold Rolled Steel
Welding:
Seam Welded
Static Resistance Rating:
Conductive (Metal)
Color:
White
Inlet Size:
8" Dia.
Outlet Size:
Square ID: 10.031" (W) x 7.64" (H) with 1.25" Flange
Discharge Size:
10" Dia.
Width:
59" w/ Filter
Depth:
31"
Height:
109.5"
Height to Center of Inlet:
80"
Contents:
Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Filter Plenum, 2x Stacking Cartridge Filters, Internal Silencer, Filter Efficiency Gauge, Drum, Stand, Hardware
Country of Manufacture:
United States
Warranty Information:
2 Year Limited Warranty
Certifications:
Complete system is cETLus certified for indoor use
Applicable Patents:
US Pat. #7247180, #9370740
Pricing Options:
Starting at $4,995.00
* All pricing subject to change
  • Specifications
Specifications
Horsepower:
5HP
Motor Type:
U.S. TEFC Motor
Motor Service Factor:
1ph: 1.00 | 3ph: 1.15
Voltage:
208-230V
Recommended Breaker Size:
30A
Amperage (Typical):
1ph: 19.5A
Frequency:
60Hz
Power Connector:
NEMA 6-20 - 250V/20A : Bare Wiring (three hot wires & ground) - Licensed Electrician Required
Power Cord Length:
10 feet
Power Cord Length:
Single-piece, backward inclined, non-sparking/non-ferrous, cast aluminum alloy.
Impeller Size:
16-1/2" Dia.
Real CFM Rating:
2,150 Actual CFM at 2" S.P.
Free Fan CFM Rating:
3,225 CFM
Maximum Suction:
16" WC
Noise Level:
75-81 dBA @ 10 ft
Filter Type:
Izumi Axtar Spunbond Media
Filtration Efficiency:
99.9% @ 0.2-2.0 microns
MERV Rating:
MERV 13 ±
Total Filtration Area:
155 sq ft
Waste Capacity:
55 Gallons
Remote Control:
Sold Separately
Remote Control Part #:
1ph: Item #AXR220000
Primary Build Materials:
Cold Rolled Steel
Welding:
Seam Welded
Static Resistance Rating:
Conductive (Metal)
Color:
White
Inlet Size:
8" Dia.
Outlet Size:
Square ID: 10.031" (W) x 7.64" (H) with 1.25" Flange
Discharge Size:
10" Dia.
Width:
59" w/ Filter
Depth:
31"
Height:
109.5"
Height to Center of Inlet:
80"
Contents:
Blower Motor Assembly, Magnetic Starter, Fan Housing, Cyclone Separator, Filter Plenum, 2x Stacking Cartridge Filters, Internal Silencer, Filter Efficiency Gauge, Drum, Stand, Hardware
Country of Manufacture:
United States
Warranty Information:
2 Year Limited Warranty
Certifications:
Complete system is cETLus certified for indoor use
Applicable Patents:
US Pat. #7247180, #9370740
Pricing Options:
Starting at:
 
Pricing Options:
Starting at $4,995.00
Media
  • Please fill out the form to access the finance calculator

  • Thank you for your interest.

    Please fill out the form below to receive your free Brochure.