Close Button

Oneida 110V Mini-Gorilla Portable Cyclone Dust Collector

made in usa
Note: shown with optional equipment.

110V Mini-Gorilla Portable Cyclone Dust Collector

Portable, Powerful, & Perfectly Designed

The Mini-Gorilla® Cyclone Dust Collector is one of Oneida Air Systems’ best designed products to date! Designed specifically for smaller workshops where the collector is moved from tool to tool, our Mini-Gorilla combines the quality and performance of a commercial system with the features and convenience of personal home units. Built to last a lifetime using industrial-grade materials, this portable system comes packed with new innovative features that have already earned it recognition as one of the best portable units on the market.

Recommended for tools with 4″ to 6″ dust collection ports, including lathes, jointers, shapers, planers, table saws, router tables, disc sanders, drum sanders, belt sanders, and more!

Innovative Benefits & Features

  • 1.5HP 110V (20A) Industrial U.S. Made Fan Blower Motor
  • Integrated High-Efficiency Cyclone Separator with 5″ Inlet
  • HEPA-Certified Filter Media with Easy-Clean Port
  • Compact, Steel Mobility Stand with Locking, Non-Marking Casters
  • 22-Gallon Drop-Down Waste Container with Casters and Viewing Window
  • Automatic Bag Holder System (2 Free Bags Included)

Continuously High Airflow Performance

Your dust collector should perform at peak efficiency at all times to ensure the health, safety, and quality of your work. That’s why Oneida Air uses only the highest quality motors with our dust collection systems. Far superior to the cheap, foreign imported motors used by other manufacturers, our industrial-grade motors are built to last a lifetime.

  • High-efficiency U.S. motor custom-tooled for Oneida Air Systems
  • Delivers up to 600 Actual CFM – ample airflow for any woodworking tool
  • Industrial-grade brushless motor designed for continuous duty
  • Low pitch noise level provides ideal operator comfort

Streamlined Integrated Cyclone Separator

One of the four tenets of good dust collection is using a cyclone to remove waste from the incoming air. Once you’ve experienced the benefits of cyclonic separation, there’s no turning back!

  • Separates up to 99% of bulk debris and fine dusts from the airstream, containing it safely in the dust bin
  • Significantly extends the lifespan of the filter and reduces time needed for filter cleaning
  • Uniquely tall cyclone design maximizes particle separation performance
  • Neutral-vane inlet and integrated air ramp minimizes inbound air turbulence
  • Ideal for direct flex hose connections to tools

High Quality & Serviceable Filtration

The Mini-Gorilla system uses HEPA-certified filter media specifically designed for dust collection applications – providing unbeatable airflow and filtration performance.

  • HEPA-certified filter media rated as 99.97% efficient at 0.3 microns
  • 3rd party tested and verified by an accredited independent lab
  • Requires zero pre-loading; works at peak efficiency right out of the box and after every cleaning
  • Wide-spaced pleating and non-stick PTFE membrane coating facilitates quick and easy maintenance
  • Vacuum hose port lets you clean fine dusts released from the filter without disassembling the system
  • Durable fiber construction and wire cage reinforcement maximizes longevity
  • Equipped with patented Flame Guard™ arrestor to satisfy future planned fire safety codes

Lightweight, Compact, and Highly Mobile Design

We’ve optimized this system for smaller workspaces where the dust collector from tool to tool so we’ve molded the cyclone, fan housing, filter plenum, and the drum from an industrial static dissipative resin.

  • 30% lighter than the nearest competitor system – only 85 lbs.
  • Small footprint and low height saves valuable space within the shop
  • Mobile tripod stand provides maximum stability and easy access for movement
  • Large 3″ locking casters roll easily over obstacles and won’t scuff your floors

Easy-to-Handle Large Capacity Dust Container

The waste container of the Mini-Gorilla is a highly reinforced, lightweight, 22-gallon drum with non-marking casters. Easy to dettach and empty, the Mini-Gorilla’s drop-down dust bin lets you work with maximum efficiency.

  • Large 22-Gallon capacity provides enough storage for hours of work
  • Dust level viewing window lets you see when the drum is getting full
  • Three quick-release latches lift the drum off the ground while system is in use for higher mobility
  • Automatic bag holder lets you put disposal liner bags within the bin for quick and easy waste disposal
  • Features three free swiveling caster wheels and easy-carry handles for dumping

 

Specifications
Horsepower:
1.5HP
Motor Type:
U.S. TEFC Motor
Motor Service Factor:
1.15
Voltage:
115V
Recommended Breaker Size:
20A HACR Style
Amperage (Typical):
16A
Phase (Pre-Wired):
1-Phase
Frequency:
60Hz
Power Connector:
NEMA 5-20 - 125V/20A
Power Cord Length:
20 feet
Impeller Type:
Single-piece, backward inclined, non-sparking/non-ferrous, composite resin.
Impeller Size:
583 Actual CFM at 2" S.P.
Real CFM Rating:
583 Actual CFM at 2" S.P.
Maximum Suction:
9" WC
Noise Level:
80.5 dBA @ 10 ft
Filter Type:
G.E. H12 HEPA Media
Filtration Efficiency:
MERV 16 ±
MERV Rating:
MERV 16 ±
Total Filtration Area:
40 sq ft
Portable:
Yes
Remote Control:
Sold Separately
Remote Control Part #:
Item #ARS115200
Primary Build Materials:
Static Dissipative Polyethylene
Static Resistance Rating:
Static Dissipative
Color:
Black
Inlet Size:
5" OD
Width:
28"
Depth:
24.75"
Height:
64.25"
Height to Center of Inlet:
43"
Actual Weight:
85 lbs.
Contents:
Blower Motor Assembly, Single-piece Fan Housing/Filter Plenum/Cyclone Separator, Stand, 3x Wheels, Drum, 3x Drum Casters, 2x Liner Bags, Viewing Window, FlameGuard Cartridge Filter w/ Clean Port, Hardware
Country of Manufacture:
United States
Warranty Information:
1 Year Limited Warranty
Certifications:
Complete Assembly cETLus Certified for Indoor Use
Applicable Patents:
US Pat. #7824457, #D604464, #8496719, #8377160, #8491686
Pricing Options:
Starting at $1,799.00
* All pricing subject to change
  • Specifications
Specifications
Horsepower:
1.5HP
Motor Type:
U.S. TEFC Motor
Motor Service Factor:
1.15
Voltage:
115V
Recommended Breaker Size:
20A HACR Style
Amperage (Typical):
16A
Phase (Pre-Wired):
1-Phase
Frequency:
60Hz
Power Connector:
NEMA 5-20 - 125V/20A
Power Cord Length:
20 feet
Impeller Type:
Single-piece, backward inclined, non-sparking/non-ferrous, composite resin.
Impeller Size:
583 Actual CFM at 2" S.P.
Real CFM Rating:
583 Actual CFM at 2" S.P.
Maximum Suction:
9" WC
Noise Level:
80.5 dBA @ 10 ft
Filter Type:
G.E. H12 HEPA Media
Filtration Efficiency:
MERV 16 ±
MERV Rating:
MERV 16 ±
Total Filtration Area:
40 sq ft
Portable:
Yes
Remote Control:
Sold Separately
Remote Control Part #:
Item #ARS115200
Primary Build Materials:
Static Dissipative Polyethylene
Static Resistance Rating:
Static Dissipative
Color:
Black
Inlet Size:
5" OD
Width:
28"
Depth:
24.75"
Height:
64.25"
Height to Center of Inlet:
43"
Actual Weight:
85 lbs.
Contents:
Blower Motor Assembly, Single-piece Fan Housing/Filter Plenum/Cyclone Separator, Stand, 3x Wheels, Drum, 3x Drum Casters, 2x Liner Bags, Viewing Window, FlameGuard Cartridge Filter w/ Clean Port, Hardware
Country of Manufacture:
United States
Warranty Information:
1 Year Limited Warranty
Certifications:
Complete Assembly cETLus Certified for Indoor Use
Applicable Patents:
US Pat. #7824457, #D604464, #8496719, #8377160, #8491686
Pricing Options:
Starting at:
 
Pricing Options:
Starting at $1,799.00
  • Please fill out the form to access the finance calculator

  • Thank you for your interest.

    Please fill out the form below to receive your free Brochure.